safesite ? led area light with retrofit adapter kit mechanical information fixture weight: 13.5lbs (6.1 kg) shipping weight: 15.5lbs (7.0 kg) mounting: see mounting compatibility section on page 2 cabling: 10 (0.25m) soow power cord electrical specifications operating voltage: 100-277vac, 50/60 hz power consumption: 43w / 55w / 70w operating temp: -40 f to +149 f (-40 c to +65 c) noise requirements/ emc: fcc title 47, subpart b, section 15, class a device. rf immunity; 10v/m, 80mhz-1ghz surge protection: 1 kv line to line 2 kv line to ground thd: <15% power factor: > 0.9 construction housing: powder coated aluminum finish: polyester / epoxy powder coat gray ral 7040 for superior corrosion resistance lens: polycarbonate - ul1598a wet location photometric information cri: > 70 cct: 5,700k (cool white) 4,300k (neutral white) optics: 180 f o r ward throw 360 circular pattern ies files: available upon request all values typical unless otherwise state certifications ? class i, div 2, groups a,b,c,d ? ul 1598/a ? csa 22.2 no. 137-m1981 ? ip66 (pending) ? nema 4x (pending) features & benefits ? 5 year full performance warranty ? instant on/off operation ? universal input (100-277 vac), 50/60hz ? mercury free ? resistant to shock and vibration ? temperature compensation technology for longer life ? l70 rated for >100,000 hours @ 25c ? factory sealed ? low t rating compared to traditional fixtures application: the safesite ? led area light saves at least 50% energy compared to traditional hid light sources, while reducing maintenance and carbon emissions in class i, div 2 applications. this light incorporates both cutting edge led technology along with proprietary optics to achieve area lighting comparable with other traditional light sources. whether your application is in a refinery, oil platform, chemical plant or any other class i, div 2 application, the led area light offers long life and requires minimal maintenance, improving safety and reliability. the safesite led area light with retrofit adapter kit luminaire is designed for installations where the fixture to be replaced is installed in compliance with all required codes. installing the safesite led retrofit luminaire is compliant with electrical codes and standards and will not void ul listings when installed in accordance with provided installation instructions. www.dialight.com ordering codes: part number optical pattern 1 color 2 lumens watts lumens per watt replaces up to hzd2c2nc 180 cool white 3,500 43 81 70w hid hzd3c2nc 360 cool white 3,500 43 81 70w hid hzd4c2nc 180 cool white 4,500 55 82 175w hid HZD5C2NC 360 cool white 4,500 55 82 175w hid hzd8c2nc 180 cool white 5,800 70 83 250w hid hzd9c2nc 360 cool white 5,800 70 83 250w hid 10.6 [270] 9.7 [245] dimensions in inches [mm] temperature ratings ambient temperature range t4a temperature code ambient temperature range t5 temperature code -40f to +149f (-40c to +65c) -40f to +113f (-40c to +45c) 1 180 optical pattern versions are optimized for a 45 mounting angle 2 part numbers listed in the above table are cool white. for neutral white version replace the 5th character with n ex: hzd2c 2n becomes hzd2n 2n 10.4 [264]
www.dialight.com mdtfhzralx001_b dialight reserves the right to make changes at any time in order to supply the best product possible. the most current version of this document will always be available at: www.dialight.com/assets/brochures_and_catalogs/illumination/mdtfhzralx001.pdf safesite ? led area light with retrofit adapter kit candela plots 180 optical pattern mounted at 45 360 optical pattern mounting compatibility safesite ? led area light with retrofit adapter kit is compatible with the following pendant ceiling wall stanchion quad-mount apm2 cm2 twm2 jm5 qm25 apm3 cm3 twm3 pm5
|
